Roll Mode; Using Wave Stream Fast Viewing Mode; Adjusting Trace Intensity - LeCroy WaveSurfer MXs-B Getting Started Manual

Roll Mode

Roll mode displays, in real time, incoming points in single-shot acquisitions
that have a sufficiently low data rate. The oscilloscope rolls the incoming
data continuously across the screen until a trigger event is detected and
the acquisition is complete. The parameters or math functions connected
to each channel are updated every time the roll mode buffer is updated, as
if new data is available. This resets statistics on every step of Roll mode
that is valid because of new data.
U W
SING AVE

Adjusting Trace Intensity

WSMXs-B-GSM-E Rev A
W
AVE
S F
TREAM AST
WaveStream fast viewing mode provides brightness-
graded intensity with a decay time similar to the action
of phosphor on an analog screen. WaveStream mode
operates at up to 5 GS/s with an update rate up to
22,000 waveforms/second for better capture of higher
frequency abnormal events.
The I
NTENSITY
trace. Pushing the button toggles between
WaveStream fast-viewing mode and real-time mode.
S MX
URFER
V M
IEWING
knob adjusts the brightness of your
-B O
S SCILLOSCOPE
ODE
42