Saving And Recalling Setups; Overview; Saving Oscilloscope Settings As A Setup File; Recalling Oscilloscope Settings From A Setup File - LeCroy WaveSurfer MXs-B Getting Started Manual

S
AVING AND

Overview

You can save or recall settings to or from hard disk, USB key, or LAN locations. This
can be very helpful if you repeat the same types of tasks over and over again, or if
you share the scope with many people.

Saving Oscilloscope Settings as a Setup File

Recalling Oscilloscope Settings from a Setup File

Recalling Default Oscilloscope Settings

WSMXs-B-GSM-E Rev A
W
AVE
R S
ECALLING
Choose File  Save Setup from menu bar.
Choose to save the Waveform Data as an Internal
Setup temporary location in RAM or to a File on
the hard drive or external storage device.
Touch Save Now to save the file.
Choose File  Recall Setup from the menu bar.
Choose to recall the Setup from an Internal Setup
temporary location in RAM or from a File on the
hard drive or external storage device.
Touch Recall Now to save the file.
Choose File  Recall Setup from the menu bar.
Touch the button under Recall Default Setup.
S MX
URFER
ETUPS
-B O
S SCILLOSCOPE
100