Edge Mode - LeCroy WaveSurfer MXs-B Getting Started Manual

G S M
ETTING TARTED ANUAL
In Zoom View, you can also apply further , , or apply a
processing store
descriptive to the zoom trace.
label

Edge Mode

This search mode locates all edges in an acquisition and presents them
time-stamped in a table. You can select positive, negative, or both edges.
When the acquisition is stopped, scan filters contained in Measurements
mode can be applied to the edges to find specific characteristics.
A level marker, corresponding to 50% in this case, is displayed in the
source trace at top.
73
WSMXs-B-GSM-E Rev A