Using Math Dialog Zoom Controls; Toolbar Shortcuts - LeCroy WaveSurfer MXs-B Getting Started Manual

Panel Control
Delay
Timebase
Offset
Gain / Sensitivity
Push – Zero Delay
Push – Zero Offset

Using Math Dialog Zoom Controls

Toolbar Shortcuts

These toolbar shortcuts can be used to perform specific actions for the Math
Trace.
Opens a Measurement selection pop-up menu. You can then select
a parameter (measurement) for the Math trace from this menu
without leaving the Math Setup dialog. The parameter
automatically appears below the grid.
Loads the Math trace into its corresponding Memory (Reference
Waveform) location (Memory 1, or abbreviated as M1).
Opens a Labeling pop-up menu that allows you to create labels tied
to the waveform.
WSMXs-B-GSM-E Rev A
W S
AVE URFER
Zoom Control Action
Zooms horizontal position
Zooms horizontal scale
Zooms vertical position
Zooms vertical scale
Resets horizontal zoom to 10:1 scale, and resets to
default horizontal position
Resets vertical zoom to 1:1 scale, and resets to default
vertical position
1. Touch the descriptor label twice to open
the Math dialog.
2. Then use the Zoom dialog on the right to
change the horizontal and vertical
position and scale.
MX -B O
S SCILLOSCOPE
90