Preferences; Audible Feedback; Auto-Calibration; Offset Control - LeCroy WaveSurfer MXs-B Getting Started Manual

G S
ETTING TARTED

Preferences

Audible Feedback

You can elect to have audible confirmation each time you touch a screen or front
panel control.

Touch Utilities  Preferences from the menu bar.

Touch the Audible Feedback Enable checkbox so the oscilloscope emits a
beep with each touch of the screen or front panel control.

Auto-calibration

You can choose to have your instrument automatically recalibrate itself whenever
there is a significant change in ambient temperature. If you do not enable this
option, the oscilloscope only recalibrates at startup and whenever you make a
change to certain operating conditions.

Touch Utilities  Preferences from the menu bar.

Touch the Automatic Calibration Enable checkbox.

Offset Control

As you change the gain, this control allows you to either keep the vertical offset
level indicator stationary (when Div is selected) or to have it move with the actual
voltage level (when Volts is selected). The advantage of selecting Div is that the
waveform remains on the grid as you increase the gain. When Volts is selected,
the waveform could move off the grid.
Note: Regardless of whether you select Volts or Div, the Offset shown in the
channel setup dialog always indicates volts. However, when Div is selected for the
Offset Control, the offset in volts is scaled proportional to the change in gain,
thereby keeping the division on the grid constant.

Touch Utilities  Preferences from the menu bar.

Touch the Offset/Delay tab.

Under Offset Setting constant in: touch either the Div or Volts button.

Local Language

The WaveSurfer MXs-B oscilloscope can be configured to display a user interface
in different languages. Make a selection and the WaveSurfer MXs-B oscilloscope
dynamically changes the language shown.
113
M
ANUAL
WSMXs-B-GSM-E Rev A