Ac Power Source - LeCroy WaveSurfer MXs-B Getting Started Manual

AC Power Source

The instrument operates from a
single-phase, 100 to 240 V
10%) AC power source at 50/60
Hz (+/-5%), or single-phase 100
to 120 V (+/-10%) AC power
rms
source at 400 Hz (+/-5%).
No manual voltage selection is
required because the instrument
automatically adapts to line
voltage.
Depending on the accessories
installed (front panel probes, PC
port plug-ins, etc.), the
instrument can draw up to 340
W (340 VA) max – all 4 channel
models and 290 W (290 VA) max
– all 2 channel models.
WSMXs-B-GSM-E Rev A
W S
AVE URFER
Note:
The instrument automatically adapts itself to the
(+/-
rms AC line input within the following ranges.
Voltage Range:
Frequency Range:
MX -B O
S SCILLOSCOPE
90 to 264 V
rms
47 to 63 Hz
90 to 132 V
rms
380 to 420 Hz
14