Autosetup Button; Measure, Zoom, And Math Quick Buttons; Cursor Knobs And Buttons - LeCroy WaveSurfer MXs-B Getting Started Manual

G S
ETTING TARTED

AutoSetup Button

Automatically sets timebase, trigger, and sensitivity to display a wide
range of repetitive signals.

Measure, Zoom, and Math Quick Buttons

Measure – Press once to open the measure dialog. Press again to
close the dialog.
QuickZoom
channels. Press again to unzoom.
Math – Press once to turn on the Math trace, and display the Math
Setup dialog. Press again to close the dialog.

Cursor Knobs and Buttons

23
M
ANUAL
– Press once to create zooms of all displayed
The WaveSurfer MXs-B oscilloscope has dedicated dual cursor
knobs for cursor control. Cursors always default to a relative
state (two cursors ON).
Knobs – Rotate to adjust cursor position. If Cursors are OFF,
rotating either knob turns Cursors ON. At this point, push in
the button to set it as the default position.
Type Button – Pressing the Type button once turns Cursors
ON to Horizontal (Time) measurements. Pressing the button
again changes it to Vertical (Amplitude) measurements.
Pressing it a third time turns the Cursors OFF.
WSMXs-B-GSM-E Rev A