Non-Monotonic Mode - LeCroy WaveSurfer MXs-B Getting Started Manual

W S MX -B O
AVE URFER S SCILLOSCOPE
As with other search modes, a trigger action can be set for Edge mode
also.

Non-monotonic Mode

The Non-monotonic search mode looks for edges that cross a threshold
more than once between high and low levels. All events that meet the
criteria of slope, hysteresis, and level are presented in a table and
highlighted in the source trace. The value displayed in the table is the
difference of the max. and min. of the non-monotonicity.
74
WSMXs-B-GSM-E Rev A