Table of Contents
Advertisement
Signal Views
WaveScan provides distinct views of your signal:
Source
view highlights all occurrences of edges that meet your
criteria.
Zoom
view allows you to expand a waveform feature vertically and
horizontally; to apply further processing; to store it, or to apply a
descriptive label to the feature.
Note: The number of grids displayed varies from depending on which views are
enabled. WaveScan handles this function automatically
Search Modes
Search modes are used to locate anomalies during acquisition.
Edge
- for detecting the occurrence of edges; selectable slope and
level
Non-monotonic
slope, hysteresis, and level
Runt
- for detecting pulses that fail to cross a threshold; selectable
polarity and thresholds
Measurement
measurements
Parameter Measurements
Besides parameter measurements made during acquisition, post-
acquisition measurements can also be made. The number of parameters
available depends on the options loaded on your instrument.
Measurements are made only on the events defined by your filter (search
criteria). A
Filter Wizard
such as ±1, 3, or 5 sigma.
WSMXs-B-GSM-E Rev A
W
S
AVE
URFER
- for detecting threshold re-crosses; selectable
- for filtering and performing parameter
is provided to quickly establish statistical criteria
MX
-B O
S
SCILLOSCOPE
70
Advertisement
Table of Contents
