Setting Up A Math Trace - LeCroy WaveSurfer MXs-B Getting Started Manual

G S
ETTING TARTED

Setting up a Math Trace

1. Press the Math front panel button
Or, touch Math  Math Setup... from the Menu Bar.
The following dialog is shown on the lower display with the Math trace ON
and the last selected Math Operator chosen as the current operator.
2. Change the currently defined Operator by touching either the icon or inside
the Operator area to bring up the following pop-up menu (if you ordered the
MathSurfer Advanced Math option, you would have more selections than
shown):
87
M
ANUAL
WSMXs-B-GSM-E Rev A