Table of Contents
Advertisement
G
S
ETTING
TARTED
Vertical Controls
When a channel is active, its descriptor label changes appearance.
When a channel is turned OFF, the next channel in sequence becomes the active
channel.
If no front panel channel buttons are lit, it means either that no channels are
turned ON, or that a Math, Zoom, or Memory trace is active. In that case, the
vertical offset and sensitivity knobs adjust the vertical position and vertical scale of
the Math, Zoom, or Memory (Reference Waveform) trace.
21
M
ANUAL
Inactive Channel
Vertical Controls are multiplexed for each
channel. The lighted channel button indicates
which channel the controls are active for.
Turn channels ON by pressing the
corresponding channel button.
Channels are made active by pressing the
channel button again.
Turn channels OFF by pressing the channel
button (activating it), and then pressing again
to turn it OFF.
Active Channel
WSMXs-B-GSM-E Rev A
Advertisement
Table of Contents
