Restarting The Application After Recovery - LeCroy WaveSurfer MXs-B Getting Started Manual

16. Once the restoration is complete, an Information window is displayed
indicating that the Data was successfully restored. Click OK.
17. Click Operations→Exit. The oscilloscope will restart and begin
installing the required software. A message is displayed asking if you
want to install Microsoft Office PowerPoint Viewer.
18. Click Yes to install PowerPoint Viewer. The InsallShield Wizard for
Adobe Flash Player opens.
19. To install Adobe Flash Player, click Install and then Finish. The X-
Stream software installer screen appears.
20. Click Next to continue. The License Agreement page is displayed.
21. Click I Agree. The Choose Components page is displayed.
22. Select all X-Stream components and click Install.
Note: A Windows Security window may be displayed indicating that Windows
can't verify the publisher of this driver software. Choose Install this driver
software anyway and then click Install.
23.
When the X-Stream installation is completed, reboot the oscilloscope
Note: Now you must activate Windows® using an Internet connection to the
Microsoft Web site or by telephone. When activating, have the Windows
Product Key number handy (it is affixed to the rear of the oscilloscope).

Restarting the Application after Recovery

Upon initial power-up, the oscilloscope automatically loads the instrument
application software. If you exit the application and want to reload it, touch the
shortcut icon on the desktop:
WSMXs-B-GSM-E Rev A
W S
AVE URFER
MX -B O
S SCILLOSCOPE
.
120