G
S
ETTING
TARTED
Using Memory Toolbar Shortcuts
These toolbar shortcuts can be used to perform specific actions for the Memory
Traces.
Opens a Measurement selection pop-up menu. You can then select a
parameter (measurement) for the Memory trace from this menu
without leaving the Memory Setup dialog. The parameter
automatically appears below the grid.
Clears the memory of the stored trace.
Opens a Labeling pop-up menu that allows you to create labels tied
to the memory.
Saving and Recalling Waveform Data
Saving Waveform Data
95
M
ANUAL
1. Choose File Save Waveform from the
menu bar.
2. Choose to save the Waveform Data to a File
3. Choose a source of the data that you want to
save, and choose a file name for the data file.
If you use a name that ends in a number instead
of a letter, the instrument may truncate the
number. This is because, by design, the first
waveform is automatically numbered 0, the
CAUTION
second 1, etc.
WSMXs-B-GSM-E Rev A