Table of Contents
Advertisement
Saving and Recalling Memories
Fastest Way to Store and Display
Being able to compare a current acquisition with a reference trace is a very
fundamental oscilloscope need. The WaveSurfer MXs-B oscilloscope has made it
easy to save a channel, math trace, or zoom trace to a memory location.
The trace is saved to its corresponding Memory trace (C1 to M1, C2 to M2, etc., Z1
to M1, Z2 to M2, etc., Math to M1) and displayed on the grid. The memory trace
has a descriptor label, a dialog, etc. like all other traces. It can even be zoomed
and repositioned on the grid.
WSMXs-B-GSM-E Rev A
W
S
AVE
Touch the Channel, Math, or Zoom descriptor label twice to
open the dialog for the trace that you desire to save to a
reference location.
Touch the Store button in the toolbar at the bottom of the
dialog.
1. Choose Math Memory Setup from the
menu bar.
2. Choose a Memory location from the
Memory Setup dialog. In this example, we'll
choose M1.
3. Choose a waveform to save into this
memory. In this example, we'll choose to
save C1 into this M1 memory location.
After you've selected the waveform to save
into memory, touch Copy Now.
The M1 memory trace contains the C1
waveform present at the time of the save,
the M1 trace is turned ON, and the
descriptor label is active. The position and
scale can be changed with the front panel
controls, just like a zoom trace.
MX
URFER
S
-B O
SCILLOSCOPE
94
Advertisement
Table of Contents
