Printing From The Oscilloscope; Adding Printers And Drivers; Changing The Default Printer - LeCroy WaveSurfer MXs-B Getting Started Manual

9. In the dialog area, touch the Printer icon.
10. Under Colors, touch the Use Print Colors checkbox if you want the traces
printed on a white background. A white background saves printer toner.
Change the printer colors in the Preference dialog.
11. Touch inside the Select Printer field. From the touch pad pop-up choose the
printer you want to print to. Touch the Properties button to see your printer
setup.
12. Touch the icon for the layout Orientation you want: portrait or landscape.
13. Touch the Grid Area Only checkbox if you do not need to print the dialog area
and you only want to show the waveforms and grids.

Printing from the Oscilloscope

You can print in one of three ways:
1. Press the printer button on the front panel.
Touch File  Print from the menu bar.
2.
3. Touch the Print Now button in the Hardcopy dialog

Adding Printers and Drivers

Note: If you want to add a printer driver, the driver must first be loaded on the
oscilloscope.
Touch File  Print Setup... from the menu bar. The Utilities Hardcopy dialog
1.
opens.
2. In the dialog area, touch the Printer icon.
3.
4. Touch the Add Printer button. The Print screen is then shown.
5. Touch the Properties button to change printer properties such as number of
copies.

Changing the Default Printer

1. Change the default printer by minimizing the instrument application by
touching File  Minimize from the menu bar.
2. Touch the Start button in the task bar at the bottom of the screen.
Select Settings  Printers.
3.
4. Touch the printer you want to set as the default printer, then touch File, Set
as Default Printer.
WSMXs-B-GSM-E Rev A
W S
AVE URFER
MX -B O
S SCILLOSCOPE
106