Cursor Types; Horizontal (Time); Vertical (Amplitude); Horizontal (Frequency) - LeCroy WaveSurfer MXs-B Getting Started Manual

Cursor Types

Horizontal (Time)

Vertical (Amplitude)

Horizontal (Frequency)

Changing Cursor Type

WSMXs-B-GSM-E Rev A
W S
AVE
Horizontal (Time) cursors are moved left and right along
the waveform. Place them at a desired location along the
time axis to read the signal's time and amplitude
information at the selected location.
Vertical cursors are lines that you move up and
down on the grid to measure the amplitude of
a signal.
Horizontal (Frequency) cursors are moved left and
right along the FFT Math trace. Place them at a
desired location along the frequency axis to read the
signal's frequency and amplitude at the selected
location.
Pressing the Type button between the cursor knobs
toggles the Cursors from one type to another, and
ultimately to OFF, without requiring a cursor setup
dialog to be opened.
MX
URFER S
-B O
SCILLOSCOPE
60