Hitachi XP P9500 User Manual page 240

The following example shows how to display information about the HDLM
driver.
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -pdrv
HDLM Driver
Alive
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 5
The following example shows how to display information about the HDLM
license.
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -lic
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 6
The following example shows how to display information about the audit
log settings:
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -audlog
Audit Log
Audit Log Category
Audit Log Facility
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
To Display Path Information
When displaying path information, if you specify either the -item or -c
parameter and also specify the -path parameter, you can select the items to
display and display a summary of path information. This section describes
each parameter, path information and displayed items.
Parameters to display path information:
-path
When you specify the -path parameter and do not specify either the -c or
-item parameter, the information will be displayed about the HDLM
managed paths without abbreviating or selecting items.
In the sub-parameters (following -path), you can filter the paths to be
listed using -hdev and sort the list using -srt. When you omit both
parameters, the command displays information for all the paths in order
of increasing AutoPATH_IDs.
For details on what is displayed in each item, see
Path Information on page
6-38
Ver
x.x.x-xx
-
Command Reference
Hitachi Dynamic Link Manager User Guide (for AIX(R))
WakeupTime
yyyy/mm/dd hh:mm:ss
: off
: -
: -
6-44.
Table 6-12 Displayed