When Performing A Migration Of Hdlm - Hitachi XP P9500 User Manual

Only new installations, upgrade installations, and re-installations are
supported.
#2
Only upgrade installations and re-installations are supported.
The installation procedures are explained in this manual in the locations
shown below.
installux.sh or installp command
¢
¢
¢
¢
¢
Unattended installation
Performing an Unattended Installation of HDLM on page 3-60
Installation on alternate disks
When Installing HDLM on Alternate Disks on page 3-48
Upgrade Installation or Re-installation of HDLM on page 3-35
To use SMIT, see the AIX documentation.

When Performing a Migration of HDLM

Table 3-9 Combination of Available Migration Methods and Migration
Environments on page 3-20
methods and target environments.
Methods Available in an PowerHA Environment and the Migration
Environments on page 3-20
that are available in an PowerHA environment and the migration destinations.
Performing a New Installation of HDLM on page 3-24
Performing an Upgrade Installation or Re-installation of HDLM on page
3-35
Upgrading or Re-installing HDLM in a PowerHA 5.5 or PowerHA 6.1
Environment (in a Local Boot Disk Environment) on page 3-55
Installing HDLM in a PowerHA 5.5 or PowerHA 6.1 Environment on
page 3-55
Upgrading or Re-installing HDLM in a PowerHA 5.5 or PowerHA 6.1
Environment (in a Boot Disk Environment) on page 3-56
HDLM in a PowerHA 5.5 or PowerHA 6.1 Environment on page 3-55
Installing HDLM in a PowerHA 7.1 Environment on page 3-58
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
lists the combinations of available migration
Table 3-10 Combinations of Migration
lists the combinations of migration methods
in
in Installing
in Performing an
3-19