Hitachi XP P9500 User Manual page 298

Key name
intermittent_error
_monitor_number
Legend:
Optional: If a key and its setting are not specified, one of the following
values will be used:
¢
¢
Note:
Setting of audit logs is not supported.
#1
Enter one key and one setting per line.
#2
If the value is not of an allowable type, an error will occur.
For details about the functions set by these keys, see
Operating Environment) on page
#3
You can specify this key only in the following cases:
¢
¢
#4
7-34
#1
You can specify a check interval
from 1 to 1440. The default is 210.
Specify the number of times an
error (that is assumed to be an
#4
intermittent error) occurs. You can
specify a value from 1 to 99. The
default is 3.
For a new installation
The default value will be used.
For an upgrade installation or re-installation:
The previous setting will be inherited.
For a new installation:
When on is specified for the auto_failback key in the installation
information settings file
For an upgrade installation or re-installation:
When on is specified for the auto_failback key in the installation
information settings file, or when automatic failback is enabled in the
installation pre-settings
Utility Reference
Hitachi Dynamic Link Manager User Guide (for AIX(R))
#2
Description
6-16.
Necessity of
definition
Maxim
Upgrad
um
e
numbe
New installa
r of
installa tion or
charac
tion re-
ters
installa
tion
Optional Optional 2
set (Sets Up the