23
Execute the following command in the client logical partition to confirm
.
that the physical volume has been recognized as hdisk.
If the following message is displayed, then the physical volume (hdisk)
was recognized correctly.
# lsdev -Cc disk
hdisk1 Available Virtual SCSI Disk Drive
Table 3-11 List of Files Inherited During an Upgrade Installation or Re-
installation on page 3-42
during an upgrade installation or re-installation of HDLM.
Table 3-11 List of Files Inherited During an Upgrade Installation or Re-
/usr/DynamicLinkManager/config/dlmmgr.xml
/var/DynamicLinkManager/log/dlmmgr[1-16].log
/var/DynamicLinkManager/log/dlminquiry[1-2].log
/usr/DynamicLinkManager/config/dlmwebagent.properties Hitachi Command Suite
/var/DynamicLinkManager/log/hdlmtr[1-64].log
/var/DynamicLinkManager/log/dlmconfig[1-2].log
/var/DynamicLinkManager/log/mmap/hdlmtr.mm
/var/DynamicLinkManager/log/dlmwebagent[1-16].log
/var/DynamicLinkManager/log/dlmutil[1-2].log
/var/DynamicLinkManager/log/mmap/dlmutil.mm
/var/DynamicLinkManager/log/installhdlm.log
When Installing HDLM in a Boot Disk Environment
1
Log in to AIX as a user with root permissions.
.
If you are using a virtual I/O server, see the virtual I/O server
documentation to log in to AIX.
2
Back up the HDLM settings.
.
If an upgrade installation or re-installation fails, AIX automatically
uninstalls HDLM, and the HDLM settings are deleted.
Perform this step so that a copy of the HDLM settings is available in this
case.
3-42
lists and describes the files that are inherited
File
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
installation
Description
File for setting up HDLM
functionality
Log files of HDLM
Manager
Log files of HDLM
Inquiry information
Common Agent
Component settings file
Trace files
Configuration log file
Trace management file
Hitachi Command Suite
Common Agent
Component log files
HDLM utility's log file
HDLM utility's log trace
management file
Unattended installation
execution log