Hitachi XP P9500 User Manual page 409

Message ID
KAPL13017- The restoration operation cannot be
E performed because DLManager.mpio.rte
is not installed.
KAPL13018- The backup operation cannot be
E performed because there is no /usr/
DynamicLinkManager/config/dlmmgr.xml
file. Execute the DLMgetras utility to
collect error information, and then
contact your vendor or maintenance
company. Refer to the HDLM User's
Guide for instructions how to execute the
DLMgetras utility.
KAPL13019- The same file name was specified for
E odmsetfile and dlnksetfile. Filename =
aa...aa, bb...bb
KAPL13020- The file odmsetfile was not restored.
E
KAPL13021- The file dlnksetfile was not restored.
E
KAPL13101-I The dlmpreuninst utility completed
successfully.
KAPL13102-I HDLM can now be uninstalled.
KAPL13103-I HDLM can be uninstalled after rebooting
the host.
KAPL13104-I The settings will be changed so that the
HDLM driver is not configured on the
hdisk. Is this OK? [y/n]
KAPL13105- The entered value is invalid. Re-enter.
W [y/n]:
KAPL13106- The entered value is invalid. The
E operation will now stop.
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Message Text
Messages
Explanation
Action
Install
DLManager.mpio.rte, and
then execute the
dlmmigsts utility again.
Action
Contact your HDLM vendor
or the maintenance
company if there is a
maintenance contract for
HDLM.
Details
aa...aa: odmsetfile
Filename
bb...bb: dlnksetfile
Filename
Action
Check file name, and then
try again.
Action
Check file name, and then
try again.
Action
Check file name, and then
try again.
Action
None.
Action
None.
Action
None.
Action
To execute dlmpreuninst,
enter y.
If you do not want to
execute dlmpreuninst,
enter n.
Action
Enter either y or n.
Details
The dlmpreuninst utility
has been stopped because
8-107