Changing The Buffer Size Per Monitoring Interval Duration - Hitachi XP P9500 User Manual

If you do not want to change the number of integrated trace files, leave
New Number (KB) blank, type !, and then press the Enter key to
return to the Hitachi Network Objectplaza Trace Library setup menu.
3 Press the Enter key.
.
The new setting is applied and the Hitachi Network Objectplaza Trace
Library setup menu appears again.

Changing the Buffer Size Per Monitoring Interval Duration

The following procedure shows how to change the buffer size per monitoring
interval.
To change the buffer size per monitoring interval:
1 In the Hitachi Network Objectplaza Trace Library setup menu, type 4 and
.
then press the Enter key.
A screen to set the buffer size will appear. The current value is displayed
in Current Size (KB).
2 Enter the desired size in New Size (KB).
.
Set a new buffer size to fit the monitoring interval set in 5: Interval
Timer. The specifiable range is between 8 KB and 2048 KB, with a default
of 64. Set this to a value smaller than that set in step 2 of
Size of Integrated Trace Files on page
value of 256 when collecting an integrated trace.
To leave the buffer size as is, leave New Size (KB) blank, type ! and
press the Enter key. You will be returned to the Hitachi Network
Objectplaza Trace Library setup menu.
3 Press the Enter key.
.
The new setting is applied and the Hitachi Network Objectplaza Trace
Library setup menu appears again.
4 In the Hitachi Network Objectplaza Trace Library setup menu, type 5 and
.
then press the Enter key.
A screen to set the monitoring interval will appear. The current value is
displayed in Current Span (sec).
5 Enter the desired interval in New Span (sec).
.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
3-79. We recommend setting a
Changing the
3-81