Hitachi XP P9500 User Manual page 66

AIX V7.1 (Virtual I/O Server)
#1
Every SP is applicable, unless otherwise specified.
#2
To set up a boot disk environment that uses Thunder 9500V series,
Hitachi AMS/WMS series, or Hitachi SMS, use SP2 or a later service pack.
#3
An environment in which the Secure by Default functionality is enabled
during installation of the OS is not supported.
#4
To set up a boot disk environment that uses a storage system of the
Thunder 9500V series or the Hitachi AMS2000/AMS/WMS/SMS series,
apply SP2 or a later service pack.
Prerequisite Programs for HDLM
Before you install HDLM, confirm that the required programs written below
have been installed. For details about HTC_ODM and XP_ODM, contact the
storage system vendor.
• VisualAge C++ Runtime 5.0.0.0 or later, IBM XL C/C++ V7 Runtime
7.0.0.0 to IBM XL C/C++ V8 Runtime 8.0.0.0 or 8.0.0.6 or later (8.0.0.1
to 8.0.0.5 are not supported), IBM XL C/C++ V9 Runtime 9.0.0.1 or later,
or IBM XL C/C++ V10 Runtime 10.0.0.1 or later, or IBM XL C/C++ V11
Runtime 11.1.0.1 or later
Execute the following command, as applicable, to check the runtime
version:
For AIX 5L V5.3:
# lslpp -L xlC.aix50.rte
For AIX V6.1
# lslpp -L xlC.aix61.rte
For AIX V7.1
# lslpp -L xlC.aix61.rte
• HTC_ODM 5.0.52.1 or later
If you are using the following storage systems, use HTC_ODM 5.0.52.1 or
later:
¢
¢
¢
¢
3-4
OS
#3
Hitachi AMS2000/AMS/WMS/SMS series
Hitachi USP (excluding the HP XP series)
Lightning 9900V series (excluding the HP XP series)
Thunder 9500V series
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Technology Level 01
ioslevel 2.1.0.xx to 2.2.0.xx (where xx is a number)
Kernel