Hitachi XP P9500 User Manual page 295

#1
Key name
Legend:
Optional: If a key and its setting are not specified, one of the following
values will be used:
For a new installation:
¢
The default value will be used.
For an upgrade installation or re-installation:
¢
The previous setting will be inherited.
#1
Enter one key and one setting per line.
#2
If the value is not of an allowable type, an error will occur.
For details about the functions set by these keys, see
for Setting the HDLM Execution Environment ODM on page
[ENVIRONMENT_SETTINGS] section
This section defines information that is used when the set operation of the
HDLM command is executed. This section is optional. If this section name is
omitted, or if any of the keys in the section are not defined, setup by means
of the set operation of the HDLM command will not be executed.
For details on the set operation, see
Environment) on page
Table 7-8 Keys in the [ENVIRONMENT_SETTINGS] Section on page 7-32
lists the keys defined in the [ENVIRONMENT_SETTINGS] section.
Hitachi Dynamic Link Manager User Guide (for AIX(R))
#2
Description
enable or disable the NPIV
option:
on: Enabled
off: Disabled (default)
set (Sets Up the Operating
6-16.
Utility Reference
Necessity of
Maxim
definition
Upgrade
number
New installatio
installa n or re-
charact
tion installatio
n
dlmodmset Utility
7-20.
um
of
ers
7-31