Finishing The Hitachi Network Objectplaza Trace Library Settings - Hitachi XP P9500 User Manual

Lookout span will appear. The current value is displayed in Current
Max (sec).
5 Adjust the maximum number of messages output to the integrated trace
.
files in New Max (sec).
The specifiable range is between 0 messages and 500 messages, with a
default of 0. If you want to increase the number of messages which are
output to the integrated trace file as much as possible, we recommend
setting a value of 0.
When you specify a monitoring interval of 0 in 6: Lookout span, the
value set in New Max (sec) will be disregarded.
Also, when you specify a value of 0 for New Max (sec), even if you
specify the monitoring interval in 6: Lookout span, the maximum
number of messages output will not be adjusted.
To leave the maximum number of messages output as is, leave New Max
(sec) blank, enter ! and press the Enter key. You will be returned to the
Hitachi Network Objectplaza Trace Library setup menu.
6 Press the Enter key.
.
The new setting is applied and the Hitachi Network Objectplaza Trace
Library setup menu appears again.

Finishing the Hitachi Network Objectplaza Trace Library Settings

This section explains how to close the Hitachi Network Objectplaza Trace
Library setup menu when you are finished.
1 In the Hitachi Network Objectplaza Trace Library setup menu, type e and
.
press the Enter key.
You will be asked to if you want to save the new settings.
2 To save the new settings, click Yes, otherwise, click No.
.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
3-83