Hitachi XP P9500 User Manual page 121

When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL06 or AIX
V7.1 with no TL:
# clusterconf -r hdiskxx
When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL07 or
later or AIX V7.1 TL01 or later:
# clctrl -start -m node-name
6 Execute the following command on the standby host to start PowerHA.
.
# smitty cl_start
7 Execute the following command on the active host to stop PowerHA.
.
# smitty cl_stop
8 Execute the following command on the active host.
.
When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL06 or AIX
V7.1 with no TL:
# clcmd stopsrc -s clconfd
# clusterconf -fu
When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL07 or
later or AIX V7.1 TL01 or later:
# clctrl -stop -m node-name
9 Perform a new installation, upgrade installation, or re-installation of HDLM
.
on the active host.
When performing a new installation of HDLM in a local boot disk
environment:
Perform the procedure described in
Preparations for an Upgrade Installation or Re-installation of HDLM on
page 3-34.
When performing a new installation of HDLM in a boot disk environment:
Perform the procedure described in
Management-Target Device on page 3-34
Upgrade Installation or Re-installation of HDLM on page
When performing an upgrade installation or re-installation of HDLM in a
local boot disk environment:
Perform the procedure described in
Boot Disk Environment on page 3-35
Installation or Re-installation of HDLM on page
When performing an upgrade installation or re-installation of HDLM in a
boot disk environment:
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Stop Applications on page 3-34
Perform Operations for HDLM
of Preparations for an
When Installing HDLM in a Local
of Performing an Upgrade
3-35.
of
3-34.
3-59