Hitachi XP P9500 User Manual page 253

Table 6-15 Items That Can Be Added by Using the -lu -item Parameter
and Sub-parameters on page 6-51
using the -item parameter and the parameters that can be specified after
the -item parameter.
Table 6-15 Items That Can Be Added by Using the -lu -item Parameter
Item that can be added
SLPR
PathName
ChaPort
CLPR
Type
IO-Count
IO-Errors
DNum
IEP
VG
All items are displayed
In the sub-parameters, -hdev or -pathid, you can filter the LU
information to be displayed. If you omit both parameters, the command
displays the information about all the LUs recognized by HDLM.
For details on the contents of each displayed item, see
Displayed LU Information on page
The sub-parameters are:
-hdev host-device-name
Filters the information only for the paths accessing the specified host
device.
Specify hdisk name for host-device-name.
The host-device-name string is case-sensitive.
-pathid AutoPATH_ID
Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example:
The following example shows how to add SLPR, PathName, ChaPort,
CLPR, Type, IO-Count, IO-Errors, DNum, IEP, and VG to the displayed
items for LU information.
Command Reference
Hitachi Dynamic Link Manager User Guide (for AIX(R))
lists the items that can be added by
and Sub-parameters
Subsequent parameter
slpr
pn
cp
clpr
type
ic
ie
dnu
iep
vg
all
6-54.
Table 6-17
6-51