Hitachi XP P9500 User Manual page 315

Message
ID
KAPL01050- The currently selected paths will be
I changed to the Online status. Is this OK?
[y/n]:
KAPL01051- Because no path has been selected
I among the currently displayed paths, the
paths in the Offline(C), Offline(E), and
Online(E) statuses will be changed to the
Online status. Is this OK? [y/n]:
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Message Text
Messages
Explanation
cancel the operation, enter
n.
aa...aa: clear or set
Action
If you want to execute the
operation, enter y. If you
want to terminate
processing, enter n. For
details on the clear
operation, see clear
(Returns the Path Statistics
to the Initial Value) on
page 6-3. For details on
the set operation, see
(Sets Up the Operating
Environment) on page
6-16.
Details
The online operation will
be started. To continue the
online operation, enter y.
To cancel the operation,
enter n.
Action
If you want to execute
online processing, enter
y. If you want to terminate
processing, enter n. For
details on the online
operation, see online
(Places Paths Online) on
page 6-11.
Details
All the paths will be placed
Online because the path
selection parameter is not
specified for the online
operation. To place all the
paths Online, enter y. To
cancel the operation, enter
n.
Action
If you want to execute
online processing, enter
y. If you want to terminate
processing, enter n. Before
you execute the
processing, be sure to
execute the view operation
of the HDLM command
set
8-13