Hitachi XP P9500 User Manual page 391
Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (640 pages) ,
- User manual (574 pages)
Table of Contents
Advertisement
Message
ID
KAPL10561-
A user operation ended dlmpostrestore
I
utility.
KAPL10571-
The dlmchpdattr utility completed
I
successfully.
KAPL10572-
No parameter has been specified.
W
KAPL10573-
A parameter is invalid. parameter =
W
aa...aa
KAPL10574-
The specified parameters cannot be
W
specified at the same time. parameter =
aa...aa
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Message Text
Messages
Explanation
aa...aa: Error number
(decimal number)
Action
Contact your HDLM vendor
or the maintenance
company if there is a
maintenance contract for
HDLM.
Details
The dlmpstrestore
process has been
terminated by an operation
such as Ctrl+C.
Action
None.
Action
None.
Action
With the -h parameter
specified, execute the
dlmchpdattr utility. Make
sure that the format of the
utility is correct, and then
re-execute it.
Details
An invalid parameter is
specified.
aa...aa: The specified
parameter
Action
With the -h parameter
specified, execute the
dlmchpdattr utility. Make
sure that the format of the
utility is correct, and then
re-execute it.
Details
aa...aa: The specified
parameter
Action
With the -h parameter
specified, execute the
dlmchpdattr utility. Make
sure that the format of the
utility is correct, and then
re-execute it.
8-89
Advertisement
Table of Contents
