Hitachi XP P9500 User Manual page 325

Message
ID
KAPL01100- aa...aa
I
KAPL01101- The target HBA port was not found.
W Operation name = aa...aa
KAPL01102- All the paths which pass the specified
I aa...aa port will be changed to the
Offline(C) status. Is this OK? [y/n]:
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Message Text
Messages
Explanation
number of trace files, all
the current trace files will
be deleted. To continue the
operation, enter y. To
cancel the operation, enter
n.
Action
If you want to execute the
operation of the HDLM
command, enter y. If you
want to terminate
processing, enter n.
Details
This message indicates the
executed command line.
aa...aa: Name of the
executed command.
Action
None.
Details
The HBA having the
HBA_ID specified in the -
hbaid parameter could not
be found.
aa...aa: : offline,
online
Action
Use the view operation of
the HDLM command
(dlnkmgr view -hba) to
check the target HBA port
and the HBA_ID of the
target HBA port. After that,
specify the appropriate
HBA_ID, and then retry.
Details
Multiple paths will be
collectively placed
Offline(C) because the -
hbaid or -chaid
parameter was specified.
To collectively place
multiple paths Offline(C),
enter y. To not collectively
place them Offline(C),
enter n.
aa...aa:CHA, HBA
Action
8-23