Hitachi XP P9500 User Manual page 407

Message ID
KAPL13010- The specified file does not exist.
W parameter = aa...aa, Filename = bb...bb
KAPL13011- The number of parameters is insufficient. Action
W
KAPL13012- Too many parameters have been
W specified.
KAPL13013- The directory for storing the specified file
E could not be created. Filename = aa...aa
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Message Text
Messages
Explanation
the dlmmigsts utility, see
dlmmigsts Utility for
Assisting HDLM Migration
on page 7-18.
Details
aa...aa: Parameter
(character string)
bb...bb: Filename
(character string)
Action
If parameter = -odm,
specify odmsetfile in
dlmmigsts again, and then
re-execute.If parameter =
-set, specify dlnksetfile in
dlmmigsts again, and then
re-execute. For details
about the dlmmigsts
utility, see dlmmigsts
Utility for Assisting HDLM
Migration on page 7-18.
Specify the -h option in
the HDLM migration
support utility, confirm the
option that should be
specified, and then re-
execute. For details about
the dlmmigsts utility, see
dlmmigsts Utility for
Assisting HDLM Migration
on page 7-18.
Action
Specify the -h option in
the HDLM migration
support utility, confirm the
option that should be
specified, and then re-
execute. For details about
the dlmmigsts utility, see
dlmmigsts Utility for
Assisting HDLM Migration
on page 7-18.
Details
aa...aa: Filename
(character string)
Action
There is not enough
capacity to store the
specified file in the
directory. Make sure there
8-105