To Display The Format Of The Set Operation - Hitachi XP P9500 User Manual

user or 1
local0 or 16
local1 or 17
local2 or 18
local3 or 19
local4 or 20
local5 or 21
local6 or 22
local7 or 23
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
example, when you want to execute the command in a shell script or
batch file.

To Display the Format of the Set Operation

-help
Displays the format of the set operation.
Example
Table 6-9 Values of the Audit Log Facility
Value Corresponding facility value in the /etc/syslog.conf file
user
local0
local1
local2
local3
local4
local5
local6
local7
The following example shows how to display the format of the set
operation:
# /usr/DynamicLinkManager/bin/dlnkmgr set -help
set:
Format
dlnkmgr set { -lb on [ -lbtype { rr | exrr | lio | exlio
| lbk | exlbk } ]
| -lb off
| -ellv ElogLevel
| -elfs ElogFileSize
| -elfn Number-Of-ElogFiles
| -systflv TraceLevel
| -systfs TraceFileSize
| -systfn Number-Of-TraceFiles
| -pchk on [ -intvl Interval-Time ]
| -pchk off
| -afb
| -afb
| -iem
| -iem
Command Reference
Hitachi Dynamic Link Manager User Guide (for AIX(R))
on [ -intvl Interval-Time ]
off
on
[ -intvl Error-Monitor-Interval ]
[ -iemnum Number-Of-Times ]
off
6-29