Hitachi XP P9500 User Manual page 244

Example
To display a summary of path information
-path -c
If the -c parameter is specified at the same time as the -path parameter,
only PathID, DskName, iLU, CP, Status, and Type are displayed for the
path information. The displayed contents are also shortened, so that each
path information item is displayed on a single line.
The items that are displayed are PathID, DskName, iLU, CP, Status, and
Type.
For details on what is displayed for each item, see
Path Information on page
When you use the -c parameter, the number of characters that can be
displayed in the product ID element of the DskName field is limited to 10.
When there are 11 or more characters in the product ID, the 8th and
following characters are abbreviated to ellipses (...).
The sub-parameters (following -path -c) are:
-stname
6-42
In the following example, IO-Count is selected as the display item
and the path information is sorted in ascending order by LUs.
Command Reference
Hitachi Dynamic Link Manager User Guide (for AIX(R))
6-44.
Table 6-12 Displayed