Hitachi XP P9500 User Manual page 50

Log name
Integrated trace
file
Trace file
Error log
HDLM utility's log
file
Syslog
HDLM Inquiry log
2-30
Table 2-7 Types of error information
Description
Operation logs of the HDLM
command are collected.
Trace information on the HDLM
manager is collected at the level
specified by the user. If an error
occurs, you might need to change
the settings to collect trace
information.
Error information is collected for the
user-defined level. By default, HDLM
collects all error information.
Logs are collected when the HDLM
utility is executed.
The HDLM messages on or above the
level set by the user with /etc/
syslog.conf are collected.
We recommend that you configure
the system so that information at the
Information level and higher is
output.
Syslogs can be checked using a text
editor.
An HDLM Inquiry log is a response
log when the Inquiry command is
issued to the hdisk.
HDLM Functions
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Output destination
The default file path is /var/
opt/hitachi/HNTRLib2/
spool/hntr2[1-16].log.
To specify the output
destination directory and the
file prefix for the integrated
trace file, use a Hitachi
Network Objectplaza Trace
Library (HNTRLib2) utility.
The trace file name is /var/
DynamicLinkManager/log/
hdlmtr[1-64].log
HDLM Manager logs:
/var/
DynamicLinkManager/
log/dlmmgr[1-16].log
Hitachi Command Suite
Common Agent Component
logs:
/var/
DynamicLinkManager/
log/dlmwebagent[1-
N].log
The value n depends on
the setting in the file
dlmwebagent.propertie
s.
The following is the log file
name:
/var/
DynamicLinkManager/
log/dlmutil[1-2].log
Syslog is not output by
default.
#
To output syslog, The syslog
file path is specified in the
file /etc/syslog.conf. For
details, see the AIX
documentation.
/var/DynamicLinkManager/
log/dlminquiry[1-2].log