Initializing Statistical Information For Paths - Hitachi XP P9500 User Manual

operation, see
result of this operation is displayed on a single line for each path.
The following shows an example in which the view operation is executed:
# /usr/DynamicLinkManager/bin/dlnkmgr view -drv
PathID HDevName OSPathID LDEV
000000 hdisk0
000001 hdisk1
000002 hdisk2
000003 hdisk0
000004 hdisk1
000005 hdisk2
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
#
For details on the displayed items and their descriptions, see
Information) on page

Initializing Statistical Information for Paths

This section explains how to initialize statistical information (I/O counts and I/
O errors) for all the paths managed by HDLM.
This procedure is useful when you want to check the number of I/O
operations and I/O errors that have occurred since the last time the I/O
counts and I/O errors were initialized to 0.
To initialize statistical information for paths:
1 Check the current status of the path.
.
The following shows how to execute the command:
# /usr/DynamicLinkManager/bin/dlnkmgr view -path
2 To initialize statistical information for all the paths managed by HDLM,
.
execute the dlnkmgr command's clear operation with the -pdst
parameter specified.
The following shows an example in which the command is executed:
# /usr/DynamicLinkManager/bin/dlnkmgr clear -pdst
KAPL01049-I Would you like to execute the operation? Operation
name = clear [y/n]:y
KAPL01001-I The HDLM command completed normally. Operation name
= clear, completion time = yyyy/mm/dd hh:mm:ss
#
3 Check to see whether the statistical information for all the paths has been
.
initialized.
The following shows how to execute the command:
# /usr/DynamicLinkManager/bin/dlnkmgr view -path
view (Displays Information) on page
00000 9500V.0051.0005
00000 9500V.0051.0015
00000 9500V.0051.0020
00001 9500V.0051.0005
00001 9500V.0051.0015
00001 9500V.0051.0020
6-30.
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for AIX(R))
6-30. The execution
view (Displays
4-9