Hitachi XP P9500 User Manual page 47

User operation
the set operation, (but not
changing the conditions)
while intermittent error
monitoring is being
performed
Changing the intermittent
error monitoring conditions
while intermittent error
monitoring is not being
performed
Changing the Turning off
automatic failback
settings
Changing the path Taking the path Offline(C) Reset
status
Placing the path Online
while intermittent error
monitoring is not being
performed
Placing the path Online
while intermittent error
monitoring is being
performed
Restarting the HDLM manager
Restarting the host
#1
When you turn the intermittent error monitoring function off, information
about paths not subject to automatic failback will be reset. If you do not
want to reset the information about paths not subject to automatic
failback when you turn the intermittent error monitoring function off,
change the target paths to Offline(C).
#2
The number of errors and the time passed since error monitoring had
started are both reset to 0, and then monitoring restarts from the time
the setting change is made in accordance with the changed monitoring
conditions.
#3
Hitachi Dynamic Link Manager User Guide (for AIX(R))
HDLM Functions
Number of
Information
errors and time
about paths
passed since
not subject to
error
automatic
monitoring
started
(Not applicable) Inherited
(Not counted.)
Reset Reset
Reset
(Not applicable) Reset
(Not counted.)
Inherited (Not applicable)
If a path has
been removed
from the paths
subject to
automatic
monitoring, that
path is no longer
monitored.
Inherited
#3
Reset
Reset Reset
failback
2-27