Setting The Number Of Trace Files; Setting Up Audit Log Data Collection - Hitachi XP P9500 User Manual

(KAPL01097-W) will be displayed to confirm the execution, and the trace file
will be is temporarily deleted.
When all the trace files become full, the oldest file is overwritten with any
new trace data.
By specifying both the trace file size and the number of trace files, you can
collect up to 1024000KB of trace data.
The following is an example of setting up the trace file size by using a
command:
# /usr/DynamicLinkManager/bin/dlnkmgr set -systfs 2000
Specify the size of the trace file in kilobytes.

Setting the Number of Trace Files

You can set the number of the trace files.
Trace files for which the number of files can be set are hdlmtrn.log (n
indicates a file number from 1 to 64).
For the number of the trace files, you can specify a value from 2 to 64. If you
specify a value smaller than the value that has already been specified, the
KAPL01097-W message will be displayed to confirm the execution, and the
trace file will be temporarily deleted.
By specifying both the trace file size and the number of trace files, you can
collect up to 1024000KB of trace data.
The following is an example of setting up the number of trace files by using a
command:
# /usr/DynamicLinkManager/bin/dlnkmgr set -systfn 10
Specify the number of trace files by using numbers.

Setting Up Audit Log Data Collection

You can set whether to collect audit log data.
If you want to collect audit log data, you must also specify the collection level
for audit log data and the audit log categories.
Table 3-17 Values Indicating Audit Log Data Collection Levels on page 3-75
describes the values that indicate audit log data collection levels. An audit log
data collection level is a severity level. The default is 6.
Value (severity)
0
1
Table 3-17 Values Indicating Audit Log Data Collection Levels
No audit log data is collected.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Explanation
3-75