Hitachi XP P9500 User Manual page 397

Message
ID
KAPL10645- A parameter value is invalid. parameter =
W aa...aa
KAPL10646- A parameter is invalid. parameter =
W aa...aa
KAPL10648- An internal error occurred in the dlmpr
E utility. Error Code = aa...aa
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Message Text
Messages
Explanation
Utility for Clearing HDLM
Persistent Reservation on
page 7-22.
Details
An invalid parameter value
has been specified for the
dlmpr utility.
aa...aa: specified
parameter (character
string)
Action
Specify the correct value
for the parameter, and
then retry. For details on
the dlmpr utility, see
Utility for Clearing HDLM
Persistent Reservation on
page 7-22.
Details
An invalid parameter has
been specified for the
dlmpr utility.
aa...aa: specified
parameter (character
string)
Action
Execute help of the dlmpr
utility to check the
parameters that can be
specified, and then retry.
For details on the dlmpr
utility, see dlmpr Utility for
Clearing HDLM Persistent
Reservation on page
Details
An error not caused by the
user has occurred in the
dlmpr utility.
aa...aa: error number
(decimal number)
Action
If a message with Error
Code = 35 is output, check
for the hdisk was deleted.
If the hdisk was deleted,
recover the state of the
hdisk and then retry. If the
KAPL10648-E message has
been issued but the hdisk
was not deleted, contact
dlmpr
7-22.
8-95