Hitachi XP P9500 User Manual page 313

Message
ID
KAPL01036- The Offline path cannot be placed online.
E PathID = aa...aa
KAPL01039- During the online operation processing of
W the HDLM command, a path that cannot
be placed in the Online status was
detected. PathID = aa...aa Would you like
to continue the processing of the online
operation? [y/n]:
KAPL01040- The entered value is invalid. Re-enter [y/
W n]:
KAPL01041- The entered value is invalid. The
E operation stops. Operation name =
aa...aa
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Message Text
Messages
Explanation
Operation Format) on page
6-4.
Details
aa...aa: Path ID (decimal
(base-10) number)
Action
Remove the error in the
path, and then retry.
Details
A path that cannot be
placed Online was detected
during multipath online
processing.
To ignore this path and
perform online processing
for the next path, enter y.
To cancel processing, enter
n.
aa...aa: Path ID (decimal
(base-10) number)
Action
If you want to continue
processing of the online
operation of the HDLM
command for other paths,
enter y. If you want to
terminate processing,
enter n. For details on the
online operation, see
online (Places Paths
Online) on page 6-11.
Details
A value other than y and n
was entered. Enter y or n.
Action
Enter y or n.
Details
Command processing will
be aborted because an
incorrect value was
entered three times in a
row for a request.
aa...aa: clear, offline,
online, or set
Action
8-11