Hitachi XP P9500 User Manual page 123
Hitachi dynamic link manager software user guide for aix (6.6) (t5208-96012, november 2011)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (640 pages) ,
- User manual (422 pages)
Table of Contents
Advertisement
If you copied the files on the DVD-ROM to your desired directory, proceed
to step 5.
3
If there is no directory for mounting the DVD-ROM, make the directory.
.
# mkdir /cdrom
cdrom is the desired directory name. Hereafter, cdrom is used for
purposes of explanation.
4
Mount the DVD-ROM.
.
# mount -r -v cdrfs /dev/cd0 /cdrom
The /dev/cd0 part depends on the system.
5
If you are using a copy of the installhdlm utility that you have placed in
.
a separate directory to install HDLM, make sure you copy the necessary
files from the /cdrom/HDLM_AIX/hdlmtool/instutil directory.
The necessary files to be copied from the /cdrom/HDLM_AIX/hdlmtool/
instutil directory are shown below:
installhdlm
¢
installhdlm_analysis
¢
dlmrmdev
¢
Also, these files need to be copied to the same directory to which the
installhdlm utility is copied.
For a new installation, proceed to step 7.
6
If you are upgrading or re-installing HDLM, back up the HDLM settings.
.
If an upgrade installation or re-installation fails, AIX automatically
uninstalls HDLM, and the HDLM settings are deleted.
Perform this step so that a copy of the HDLM settings is available in this
case.
If an upgrade installation or re-installation fails, perform a new
installation, and then re-execute setup to reflect the settings that have
been backed up.
Save the HDLM environment settings information.
¢
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys > any-file-
name
Make sure that the license has not expired.
Save the HDLM execution environment ODM settings.
¢
# /usr/DynamicLinkManager/bin/dlmodmset -o > any-file-name
7
In the following cases, prepare the license key or the license key file:
.
If you are installing HDLM for the first time
¢
If you are upgrading or re-installing HDLM after the licensing term has
¢
expired
If the directory that contains the license key or the license key file is
specified in the installation information settings file, you can use any
storage directory name and file name.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
3-61
Advertisement
Table of Contents
