Renaming Zones; Cloning Zones - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

4. Highlight an element in the Member Selection List that you want to include in your zone, or
5. Click the right arrow to add a zone member, or click the left arrow to remove a zone member.
6. Select Zoning Actions > Save Config to save the configuration changes.

Renaming zones

For information on enabling the configuration, refer to
To change the name of a zone, perform the following steps.
1. Open the Zone Administration window as described in
2. Click the Zone tab.
3. Select the zone you want to rename from the Name list.
4. Click Rename.
5. In the Rename a Zone dialog box, enter a new zone name and click OK. The zone is renamed in
6. Select Zoning Actions > Save Config to save the configuration changes.

Cloning zones

To perform clone operations for zoning, the EGM license must be installed on the switch; otherwise,
access to this feature is denied and an error message displays.
The EGM license is required only for 8 Gbps platforms, such as the following:
•
•
•
•
•
For non-8 Gbps platforms, all functionalities are available without EGM license.
To clone a zone configuration, perform the following steps.
1. Open the Zone Administration window as described in
2. Click the Zone tab.
3. Select the zone you want to clone from the Name list.
4. Click Clone
5. In the Clone an Existing Zone dialog box, enter a name for the copied zone.
6. Click OK. The selected zone is copied from the Zone Admin buffer.
Web Tools Administrator's Guide
53-1002756-01
The zone members for the selected zone are listed in the Zone Members list.
highlight an element in the Zone Members list that you want to delete.
The zone is modified in the Zone Admin buffer.
page 104.
the Zone Admin buffer.
Brocade Encryption Switch
Brocade 300, 5300, and 5100 switches
Brocade VA-40FC
Brocade 8000
Brocade 7800
page 104.
Zoning management
"Enabling zone configurations"
"Opening the Zone Admin window"
"Opening the Zone Admin window"
8
on page 118.
on
on
113