Gige Port Modes - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual
Brocade web tools administrator's guide v7.1.0 (53-1002756-01, march 2013)
Hide thumbs
Also See for StoreFabric SN6500B:
- User manual (1505 pages) ,
- Command reference manual (1168 pages) ,
- Reference (934 pages)
Table of Contents
Advertisement
5
GigE port modes
GigE port modes
Web Tools allows you to set the GigE port mode for the FX8-24 DCX Extension Blades to 1G, 10G, or
dual modes.
To configure the GigE port mode, perform the following steps:
NOTE
You must install the FX8-24 DCX Extension Blade in a slot containing 10GE license to configure the
mode.
1. Select Port Admin > GigE Ports.
2. Select View > Advanced.
3. Select a slot from the GigE Ports Explorer panel.
4. Select one of the following modes from the Mode drop-down button.
5. Click Yes on the confirmation dialog box.
84
The Mode drop-down button gets enabled.
-
1G - To enable ge0 through ge9 ports.
-
10G - To enable xge0 and xge1 ports.
-
Dual - To enable ge0 through ge09 and xge0 ports.
Web Tools Administrator's Guide
53-1002756-01
- Quick Links:
- Web Tools, the Egm License, and...
Hide quick links:
Advertisement
Table of Contents
