Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 134

8
Zoning management
FIGURE 24
ATTENTION
Any changes you make in the Zone Administration window are held in a buffered environment and
are not updated in the zoning database until you save the changes. If you close the Zone
Administration window without saving your changes, your changes are lost. To save the buffered
changes you make in the Zone Administration window to the zoning database on the switch, refer to
"Saving local zoning changes"
Note the following:
•
•
In the Zone Administration window, all WWNs also display vendor names.
The Member Selection List only lists the ports of the current switch and the devices of all the
switches in the fabric. Slot and port information of other switches are not displayed in the tree.
Click the Alias tab to display which aliases the port or device is a member of. Also, you can
right-click the device nodes and click View Device Detail to display detailed information about the
selected device.
106
Zone Administration window
"Saving" means updating the zoning database on the switch with the local changes from the
Web Tools buffer.
"Refreshing" means copying the current state of the zoning database on the switch to the Web
Tools buffer, overwriting its current contents.
on page 108.
Web Tools Administrator's Guide
53-1002756-01