Renaming Zone Configurations; Cloning Zone Configurations; Deleting Zone Configurations - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

5. Click the right arrow to add a configuration member or the left arrow to remove a configuration
6. Select Zoning Actions > Save Config to save the configuration changes.

Renaming zone configurations

The new name cannot exceed 64 characters and can contain alphabetic, numeric, and underscore
characters.
NOTE
You cannot rename the currently enabled configuration.
To rename the zone configuration, perform the following steps.
1. Open the Zone Administration window as described in
2. Select the Zone Config tab.
3. Select the configuration you want to rename from the Name list and click Rename.
4. In the Rename a Config dialog box, enter a new configuration name and click OK.
5. Select Zoning Actions > Save Config to save the configuration changes.

Cloning zone configurations

You must use Web Tools with the EGM license to perform cloning operations for zone
configurations; otherwise, access to this feature is denied and an error message displays.
To clone a zone configuration, perform the following steps.
1. Open the Zone Administration window as described in
2. Select the Zone Config tab.
3. Select the zone configuration you want to clone from the Name list.
4. Click Clone.
5. In the Copy An Existing Zone Config dialog box, enter a name for the copied zone and click OK.
6. Select Zoning Actions > Save Config to save the configuration changes.

Deleting zone configurations

To delete a zone configuration, perform the following steps.
Web Tools Administrator's Guide
53-1002756-01
member.
page 104.
The configuration is renamed in the configuration database.
page 104.
The selected zone is copied from the Zone Admin buffer.
No changes were made to the effective configuration. You do not need to enable the
configuration.
Zone configuration and zoning database management
"Opening the Zone Admin window"
"Opening the Zone Admin window"
8
on
on
117