Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 89

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Ports Explorer tree
The Ports Explorer tree displays on the left side of the window. Items in the tree are displayed as
follows:
•
•
•
•
Button area
The button area contains buttons for all the tasks you can perform on the selected port. If you
select more than one port, buttons are available for only the tasks that you can perform on all of
the selected ports. Buttons are grayed (unavailable) if they are not applicable to the selected ports.
Port information displays in either a table of ports or information about a specific port, depending
on your selection. If you select a slot or switch, the system displays a table of all the ports for the
slot or switch. If you select a port, the system displays detailed information about the port.
Subtabs
You can view either Basic Mode or Advanced Mode, and to view the subtabs that contain additional
information about the port. The available subtabs depend on the type of port selected.
To view basic mode, select View > Basic. When viewing detailed information about a port, Basic
Mode provides these subtabs:
Web Tools Administrator's Guide
53-1002756-01
MTU Size
Compression Mode
Data L2COS Value
DSCP Data
IKE Policy Number
IPsec Policy Enabled
Keep Alive Timeout
MaximumCommunicationRate
MinimumCommunicationRate
MaxRetransmitRate
MinRetransmitRate
Metric
Pre-Shared key
QOS Mapping
Selective Ack
Switches—Switch ID, with switch name in parentheses; for example, 3(MapsSW_202)
Blades—Slot number of the blade, with blade ID in parentheses; for example, Slot 7(24)
Ports—Port number; for example, Port 2
10G SFP ports— A yellow triangle badge displays to visually distinguish the 10G SFP+ ports.
Port management overview
5
61