Changing The Access Control Configuration; Radius Management - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

15

RADIUS management

3. Select a user name from the User Name menu in the SNMPv3 section.
4. Double-click a recipient IP address in the SNMPv3 section and enter a new IP address.
5. Select a trap level from the Trap Level menu.
6. Optional: Select the Enable SNMPv3 Informs for all Trap Recipients check box to enable or
7.
8. Click Apply.

Changing the access control configuration

NOTE
The port number is not included.
To change the access control configuration, perform the following steps.
1. Open the Switch Administration window as described in
2. Select the SNMP tab.
3. Double-click an access host IP address in the Access Control List section and enter a new host
4. Select a permission for the host from the Access Control List menu.
5. Click Apply.

RADIUS management

Fabric OS supports RADIUS authentication, authorization, and accounting service (AAA). When
configured for RADIUS, the switch becomes a Network Access Server (NAS) that acts as a RADIUS
client. In this configuration, authentication records are stored in the RADIUS host server database.
Login and logout account name, assigned role, and time accounting records are also stored on the
RADIUS server.
You should set up RADIUS through a secure connection such as SSH.
182
NOTE
The list is scrollable. If you do not see your user name, scroll down using the scroll bar or by
clicking the User Name heading.
disable inform requests for all trap recipients.
Enabling SNMPv3 informs allows you to enter the Engine ID.
The Engine ID is required to authenticate the inform request. If informs request is disabled, the
SNMP manager does not send a response to the sender.
window" on page 31.
IP address. You can enter an IP address in either IPv4 or IPv6 format. When you use the IPv6
format, you must include a prefix; for example,
NOTE
The list is scrollable. If you do not see your user name, scroll down using the scroll bar or by
clicking the Access Host heading.
Options are Read Only and Read Write.
"Opening the Switch Administration
.
fec0::2002/64
Web Tools Administrator's Guide
53-1002756-01