Access Control List Policy Configuration - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

6. To grant the role a read/write privilege, select the privilege and click the right-arrow next to the
7.
8. To delete a privilege, select it and click left-arrow.
9. Click OK to save your changes.

Access control list policy configuration

Support for the Access Control List (ACL) policies is currently defined in the Switch Connection
Control (SCC) and Device Connection Control (DCC) policies. SCC and DCC policy configuration in
base Fabric OS is performed on a switch-local basis.
Fabric Configuration Server (FCS) Policy can be created only once. While creating the FCS policy,
the local switch WWN is automatically included in the list. In the FCS list, the switch in the first
position becomes the primary FCS switch. If the first switch in the FCS list is not reachable, the next
switch becomes the primary switch. You can also explicitly specify the primary FCS switch.
If there is no SCC, DCC, or FCS policy, the defined and active list is blank.
Web Tools Administrator's Guide
53-1002756-01
The Switch Admin:Edit User Defined Role dialog box displays.
FIGURE 40
Switch Admin:Add User Defined Role dialog
Read & Write Privileges section.
You can select multiple privileges.
To grant the role a read privilege, select the privilege and click the right-arrow next to the Read
Privileges section.
You can select multiple privileges.

Access control list policy configuration

15
173