Adding And Removing Members Of A Zone; Renaming Zones - Brocade Communications Systems SN3000B Administrator's Manual

9
Zoning management
6. Expand the Member Selection List to view the nested elements. The choices available in the
7.
8. Click the right arrow to add the zone member.
9. Optional: Repeat steps 7 and 8 to add more elements to your zone.
10. Optional: Click Add Other to include a WWN or port that is not currently a part of the fabric. At
11. Select Zoning Actions > Save Config to save the configuration changes.

Adding and removing members of a zone

For information on enabling the configuration, refer to
NOTE
When you assign a node WWN to an alias or zone, all of the WWPN's associated to that Node are
also moved. This functionality is supported only for IM0 mode. This behavior is duplicated in Brocade
Network Assistant zoning. This functionality is supported only by selecting the node WWN and
assigning it to the alias or zone.
To add or remove zone members, perform the following steps.
1. Open the Zone Admin window as described in
2. Select the Zone tab.
3. Select the zone you want to modify from the Name list.
4. Highlight an element in the Member Selection List that you want to include in your zone, or
5. Click the right arrow to add a zone member, or click the left arrow to remove a zone member.
6. Select Zoning Actions > Save Config to save the configuration changes.

Renaming zones

For information on enabling the configuration, refer to
To change the name of a zone, perform the following steps.
1. Open the Zone Admin window as described in
2. Click the Zone tab.
3. Select the zone you want to rename from the Name list.
126
list depend on the selection made in the View menu.
Select an element in the Member Selection List that you want to include in your zone.
Note that LSAN zones should contain only port WWN members. The right arrow becomes
active.
The selected member is moved to the Zone Members window.
this point, you can either save your changes or save and enable your changes.
To enable the configuration, refer to
The zone members for the selected zone are listed in the Zone Members list.
highlight an element in the Zone Members list that you want to delete.
The zone is modified in the Zone Admin buffer.
"Enabling zone configurations"
"Enabling zone configurations"
"Opening the Zone Admin window"
"Enabling zone configurations"
"Opening the Zone Admin window"
on page 131.
on page 131.
on page 118.
on page 131.
on page 118.
Web Tools Adminstrator's Guide
53-1002152-01