Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 194

15
User-defined accounts
4. Enter the user name.
5. Select a role from the drop-down menu.
6. Optional: Enter a description of the account.
7.
8. Enter the password for the account.
9. Retype the password in the Confirm Password field for confirmation.
10. Check the available Virtual Fabrics that you can access.
166
FIGURE 38
Add User Account dialog box (VF)
The user name must begin with an alphabetic character. The name can be up to 40 characters
long. It is case-sensitive and can contain alphabetic and numeric characters, the dot (.) and
the underscore (_). It must be different from all other account names on the logical switch.
For VF-enabled switches, the selection is done per logical fabric ID. (Refer to
Access Control" on page 13 for information about these roles.)
Click Enabled or Disabled to enable or disable the account.
The password is not displayed when you enter it on the command line. Passwords can be from
8 through 40 characters long. They must begin with an alphabetic or numeric character. They
can include alphanumeric characters, the dot (.), and the underscore
(_). They are case-sensitive.
Passwords must also meet any additional password rules that were set up. (Refer to the
procedure "Setting the rules for passwords"
For Virtual Fabrics, all logical fabrics IDs (1-128) are displayed, even if they have not all been
created.
The All button is disabled unless the following conditions are met:
•
The selected role for the target user must be admin or securityadmin.
•
You must be a physical fabric administrator.
on page 169 for more information.)
Web Tools Administrator's Guide
"Role-Based
53-1002756-01