Adding And Removing Members Of A Zone - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

8
Zoning management
To create a zone, perform the following steps.
1. Open the Zone Administration window as described in
2. Select a format to display zoning members in the Member Selection List as described in
3. Select the Zone tab.
4. Click New Zone.
5. In the Create New Zone dialog box, enter a name for the new zone, and click OK.
6. Expand the Member Selection List to view the nested elements. The choices available in the
7.
8. Click the right arrow to add the zone member.
9. Optional: Repeat steps 7 and 8 to add more elements to your zone.
10. Optional: Click Add Other to include a WWN or port that is not currently a part of the fabric. At
11. Select Zoning Actions > Save Config to save the configuration changes.

Adding and removing members of a zone

For information on enabling the configuration, refer to
NOTE
When you assign a node WWN to an alias or zone, all of the WWPN's associated to that Node are
also moved. This functionality is supported only for IM0 mode. This behavior is duplicated in Brocade
Network Assistant zoning. This functionality is supported only by selecting the node WWN and
assigning it to the alias or zone.
To add or remove zone members, perform the following steps.
1. Open the Zone Administration window as described in
2. Select the Zone tab.
3. Select the zone you want to modify from the Name list.
112
page 104.
"Selecting a zoning view"
The Create New Zone dialog box displays.
LSAN zones and QoS zones have specific naming requirements:
-
For LSAN zones, refer to
-
For QoS zones, refer to
The new zone displays in the Name list.
list depend on the selection made in the View menu.
Select an element in the Member Selection List that you want to include in your zone.
Note that LSAN zones should contain only port WWN members. The right arrow becomes
active.
The selected member is moved to the Zone Members window.
this point, you can either save your changes or save and enable your changes.
To enable the configuration, refer to
page 104.
on page 109.
"LSAN zone requirements"
"QoS zone requirements"
"Enabling zone configurations"
"Enabling zone configurations"
"Opening the Zone Admin window"
on page 104.
on page 104.
on page 118.
"Opening the Zone Admin window"
Web Tools Administrator's Guide
on
on page 118.
on
53-1002756-01